Line for formatting and sprinkling of pastilles LSP

Our confectionery equipment production is located in Varna, Republic of Bulgaria. All our equipment has received declarations of conformity of our equipment to the requirements of the European Union.

Line for formatting and sprinkling of pastilles LFP is intended for longitudinal and transverse division of layers (pastilles, marshmallow and any other viscous and sticky consistency) into segments of specified dimensions and sprinkling with powdered sugar, starch, etc.

Comprises:

• Unit for preliminary dusting of the conveyor belt with powdered sugar. Equipped with a turner and individual drive.
• Slitting conveyor with belt width 600 mm and individual drive. Disc cutting unit with separate rotating shaft, disc oil lubrication system, disc cleaning system and individual drive.
• Intermediate conveyor with belt width 600 mm and individual drive.
• Adjustable belt conveyor with individual drive. The module is equipped with a number of separate T-shaped bundles and is designed to move the previously longitudinally cut layers apart from each other. Bundle width 10 mm. When changing the width of the workpiece, it is required to throw the bundles on the dial-up shaft to the required width, the size is set to a multiple of 10 mm.
• Cut to length conveyor with a belt width of 700 mm. The module is equipped with a pneumatic guillotine cutting unit with an oil lubrication system for the blade. No product accompaniment. The cut to length conveyor is divided into two separate conveyors with individual drives. The cutting process takes place on a separate rotating shaft.
• Conveyor with a powdered sugar sprinkling unit and a belt width of 700 mm.
• Conveyor for blowing off excess powdered sugar from the top of the product layer with a mesh width of 800 mm. The module is equipped with a plexiglass guard, which prevents excess powder from spraying.
• System for receiving surplus powder with further transportation to the receiving hopper of the sprinkling unit. Excess powder, waking up through the blowing conveyor mesh, falls on the return conveyor, which feeds back to the sprinkling unit. The return conveyor belt is equipped with sidewalls and transverse guides. The width of the return belts is 200 mm.
• Product receiving conveyor with belt width 800 mm and individual drive.

Principle of operation: Finished semi-finished product (layer) is manually fed to the conveyor belt of the longitudinal divider. The disk divider provides cutting of the formation into longitudinal blanks. Then the pre-cut blanks go to the belt conveyor, where the cut strands are separated from each other. Then the separated strands are transferred to the guillotine cutting conveyor. Guillotine cutting ensures cross-cutting into pieces of required length.

Benefits and Features:

• Pneumatic units from the company Camozzi (Italy).
• Tramec motor reducers (Italy).
• Mitsubishi frequency converters (Japan).
• Control based on the Delta controller (Taiwan).
• All items of equipment, contiguous with products made of materials approved for contact with food and media.