Pot Digester Electric PDE (60, 100, 160, 200, 250 liters)

Our confectionery equipment production is located in Varna, Republic of Bulgaria. All our equipment has received declarations of conformity of our equipment to the requirements of the European Union.

Pot Digester Electric PDE (60, 100, 160, 200, 250 liters) is a modern high-tech universal industrial equipment designed for the preparation of a wide range of products:
• Confectionery industry – sugar syrup, invert syrup, condensed milk, confectionery or chocolate glaze, jam, marshmallow mass, caramel mass, any confectionery mass, fillings, marmalade, vegetable and fruit mass, etc.
• Culinary production – preparation of second and third courses at catering establishments: broths, vegetables, side dishes, compotes, drinks, sauces, as well as boiling water.
• Dairy industry – boiling milk.

Features of the equipment operation depending on the heating environment:
1. Work on water
They are mainly used for kindling chocolate glaze (tempering containers), light-alloy fats. In this case, the water in the pot jacket is not brought to a boil.
2. Work with food grade glycerin or oil
Main application is the confectionery industry. A feature of this type of pots is a significantly higher operating temperature, therefore they are used for cooking syrups (the cooking temperature of invert syrup, for example, is 110 ° C), marmalade. In this case, the operating temperature can reach 200 ° C.
Device: Electric cooking pots PDE-60, PDE-100, PDE-160, PDE-200, PDE-250 are stationary pots (optionally reversible), are a prefabricated welded structure. The cooking vessel is made of sheet stainless steel with a thickness of 2 mm (walls) and 3 mm (bottom), hermetically connected to the heating jacket and heat generator. The brewing vessel is closed with a lid consisting of two halves. Heating jacket and heat generator with installed heating element – the space between the cooking container and the outer wall is filled with a heat carrier (distilled water, food glycerin or PMS-100 oil)… The heat generator is equipped with a heating element and a coolant drain valve. A dry running sensor is installed on the heating jacket to control the minimum water level and temperature sensors for the coolant and product. The coolant temperature is set and controlled by a meter – regulator installed on the control panel. Optionally, a geared motor is installed on the bracket with a stirring device. A tap with a passage of 40 mm is installed on the pot to drain the finished product. Optional passage 100 mm.
Advantages of PDE pots from StanGrad:
• PDE pots operate using water, glycerin or PMS-100 oil as a heat carrier.
• Bottom and heat generator pots are made of food steel with a thickness of 3 mm;
• Pot jacket is made entirely of food grade stainless steel, which excludes the possibility of failure of the pot heating jacket due to through corrosion.
• Durable heating elements made of stainless steel.
• Gear motors from the Tramec and Transtecno companies (Italy).
• Industrial electronics OWEN (Russia).
• Pot casing is made of stainless steel, which gives the equipment an aesthetic appearance.
• Possibility of manufacturing a pot with a 100 mm diameter drain flange, which is irreplaceable for quick drainage of the finished product from the pot.
• We are not engaged in the restoration of used pots and their further sale under the guise of new equipment. Our digesters are only new, mass-produced equipment.
• Factory build quality.